COBHAM SOLO4 Especificações Página 59
- Página / 99
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
59
9 NETSTREAM IP Output Option
9.1 General Info
This section is relevant only to customers that have the NETSTREAM
option fitted in their SOLO2 or SOLO4 receiver.
The NETSTREAM can only be fitted in box style 2.
The NETSTREAM product features an RJ45 socket for connection to
10 Base T or 100 Base T Ethernet networks. The network interface
automatically switches between 10 Base T and 100 Base T as required.
The connector is wired for straight conne
ction to a network Hub and
does not automatically compensate for Ethernet crossovers. If a direct
connection to a PC is required, then an Ethernet cross over cable
should be used.
9.2 Streamer
The main use for the NETSTREAM card is to allow viewing of the
received video/audio signal on a standard PC (or laptop) running the
domo software decoder software (part number NETSWDR).
Data is transmitted over the Ethernet
network by means of “multicasting”
i.e. continuous real-time streaming of packets accessible to any PC
connected to the network.
It is therefore possible for more than once connected PC to view the
streamed data simultaneously.
Two types of multicast IP packets are streamed.
• Packets carrying video, audio and data as received by the unit;
• Packets known as Session Announcement Protocol and Sessions
Desc
ription Protocol data (SAP and SDP), which contain information
regarding the nature and location of the stream itself.
9.3 Web Server
The unit features a web server, which can be used to change the
configuration of the streaming parameters.
The default IP address of the unit when delivered is 192.168.0.71
A standard Internet browser can be used to reach the configuration
page of the unit.
The URL of the configuratio
n page is http://192.168.0.71/index.htm
Note that the address of the index page will change in the instance that the NETSTREAM
IP address is subsequently changed.
- SOLO2 and SOLO4 1
- Users’ Manual 1
- 1 Table of Contents 2
- 2 Change History 4
- • Advanced operation 5
- • Technical reference 5
- 4 Introduction 6
- 5 Warranty and Support 7
- 5.1 Warranty Cover 7
- 6.3 CE marking 8
- S-Band 10
- Made in the UK 10
- Controls 12
- Cables and Connections 15
- • Control 3m 16
- • DC Power 2m 16
- DC Power 17
- Video and Audio 17
- Antennas 18
- • Vehicle based applications 19
- Connections 22
- Square down-converter 24
- Video Output Connection 28
- • Current Draw – 0.9A at 12V 29
- • Current Draw – 1.0A at 12V 29
- Control Cable 30
- Data Connection 30
- Installation Notes 30
- 7.4 Powering on the System 31
- Diagnostic On Screen Display 32
- Using the SOLBAT 34
- Charging the SOLBAT 34
- Amplifier Connection 35
- DC Power and Control Cable 36
- • Vehicle applications 37
- • Aircraft applications 37
- • Long Range fixed links 37
- RF Connection 38
- 8 Advanced Operation 41
- Output Frequency (MHz) 43
- Bandwidth Mode 44
- Default Transmit Mode 44
- Scrambling 44
- File Options 44
- Advanced TX Controller Window 45
- Modulation Bandwidth 45
- Modulation Output 45
- Narrow Band FEC 46
- Narrow Band Guard Interval 46
- Narrow Band Modulation 46
- DVB-T Service Name 46
- DVB-T FEC 46
- Video Bitrate 48
- Horizontal resolution 48
- Audio Encoder 48
- Audio Input Level 48
- Unit Name 48
- Input Frequency (MHz) 52
- Service Name 52
- Descrambling 52
- Advanced RX Controller Window 53
- Narrowband / DVB-T 53
- Input Frequency 53
- FPGA Version (Status Only) 57
- Chaining 57
- 9 NETSTREAM IP Output Option 59
- 9.1 General Info 59
- 9.2 Streamer 59
- 9.3 Web Server 59
- 10 Software Decoder 62
- 10.1 General Information 62
- 10.3 Encrypted Streams 65
- 10.4 Main Decoder Window 67
- Enable audio 68
- Close window 68
- 11 Fault Finding 71
- 11.1 Indicated Faults 71
- 11.2 Fault Symptoms 72
- 12 LED Indicators 73
- 13.1 Input Status Page 74
- 13.2 RF Advanced Page 75
- 13.3 Engineering Data Page 76
- 13.4 GPS Overlay 76
- 13.5 Frequency Scan Page 77
- Quick Scanning Stage 78
- Service Scanning Stage 78
- Completed Scan 79
- Front Panel Control 80
- Control Commands 81
- Original OSD Mode 82
- OSD Timeout 83
- 15 Control Protocols 86
- 15.5 Receiver Command List 94
- 16 Default Configurations 98
Manuais e produtos relacionados com Recetor COBHAM SOLO4
Recetor COBHAM Messenger VETA Manual do Utilizador
(36 páginas)
(36 páginas)
Recetor COBHAM NanoVue Manual do Utilizador
(51 páginas)
(51 páginas)
Recetor COBHAM Messenger VETA Manual
(31 páginas)
(31 páginas)
© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.052 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais