COBHAM SAILOR Fleet One Manual de Instalação descarregar pdf (Página 77)

Chapter 5: Configuration

98-141368-A 69

2. At DHCP status, select Enabled (recommended for most purposes), or Disabled.

•If you select Enabled, the terminal assigns dynamic IP addresses to devices connected

to the terminal.

•If you select Disabled, you need to set up a static IP address in the connected device.

3. If you want to change the Local IP address and the Netmask of the terminal, type in

the new address and netmask.

The Local IP address is the IP address of the terminal. It is used for accessing the web

interface. By default, the address is 192.168.0.1 and the netmask is 255.255.255.0.

4. Click Apply.

To manage IP handsets and smartphones

You may connect your IP handsets directly to the LAN interfaces or use a PoE switch to

connect more handsets. You may also connect a smartphone via a WLAN access point

connected to the LAN interface. The SAILOR Fleet One terminal supports connection of up to

4 handsets or smartphones through the LAN interface.

Each handset or smartphone must have a unique local number in the range 0501 to 0504 as

well as a unique password. By default, a handset number is automatically assigned when an IP

Handset from Cobham SATCOM is connected. For other IP handsets, or if you want to change

the password for the handset, see the next section Connecting and configuring IP handsets

or smartphones.

Note

A number of IP subnets cannot be used in connected devices because they are

reserved for internal use in the terminal. See List of reserved subnets on

page 109.

Note

For IP Handsets from Cobham SATCOM: The IP Handset with the local number 0501

is the master IP Handset. This means you can start/stop data connections from the

terminal with this IP Handset, if the function is allowed in the User permissions page.

See Set up user permissions on page 82.

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 131 132

Sem comentários

COBHAM SAILOR Fleet One Manual de Instalação Página 77