
SOLH264TX Broadcast Transmitter
H264TX, H264ENGTX, H264ENC
DS000091
Rev 1.2 2013-05-02
resolution
This is the fraction of the vertical resolution
for whatever format you have selected.
Let’s say you chose an HD 1080 format. This
is actually 1920 x 1080 where 1080 is the
vertical resolution.
If you choose Full then you’ll see all 1080
lines, if you choose 1/2 you’ll see a down-
sampled picture which requires much less bit-
rate to encoder.
Note: Using a sub-vertical resolution will
force the Encoding mode to progressive.
Intra only
2 to 64 frames
GOP means Group of Pictures. The default
results in a GOP length equivalent to 1
second. (See Part-B Concept Guide, for an
explanation of GOP structures).
Shorter GOP, less delay, lower quality video,
more error resilience.
Longer GOP, more delay, higher quality
video, less error resilience.
Note: This option only affects Standard delay
Encoding modes.
Decoding Time Stamp (DTS) is used to apply
an additional video decoding delay for 3
rd
party decoders which might require it. Audio
is also delayed by the same amount to
ensure synchronisation.
Video Bit Rate
(Mbit/s)
Checkmark
Normally left in automatic. You can put a
checkmark in here and then the Video bit
rate box will become active. Now you can
manually set the video bit rate you want to
use.
blocking filter disabled
You can increase the sharpness of the video
but you will reduce the bandwidth.
De-blocking filter disabled applies to the
H.264 encoder only. This option is aimed at
reducing processor power needed when
using a PC based software decoder. Though
video quality will be reduced as a
consequence.
Comentários a estes Manuais