
For further information please contact +44 (0)1489 566 750
36
NETNode IP Mesh Radio (Plain)
* Starred items in italics will be supported in future releases
PTZ camera interface (with AVI fitted)
User camera type PAL or NTSC
User camera control From Mesh Commander* PC application using
VISCA, PELCOD or PELCOP
From any user supplied desk controller
Requires RS232 interface
NETNode bespoke cameras NETPTZ long range PTZ
NETuPT short range pan tilt
Triggers*
Trigger source Third party equipment remote trigger (e.g. ANRP, PIR, etc)
User pre-set time trigger
General purpose trigger input
Video motion detection (NETAV option)
Audio level (NETAV)
Trigger action Start to transmit (silence mode)
Activate video stream (NETAV option)
Activate audio stream (NETAV option)
Move camera to preset position
General purpose trigger output
Activate local store feature
Control
Local control LEDs power and mesh status
Remote control Mesh Commander* PC application
Full control of all parameters in a map based
application
Physical
Sealing No IP rating - splash proof
Dimensions H 155mm, W 153mm, D 45mm
Mounting options base unit Through hole screws
Weight 1.24kg (including heat sink)
Power
DC input 12-14V
Power consumed 1W 14W
Environment
Temperature range -10 to 50 deg C
Connectors
Power:
Female Lemo 4 pin 0B Pin 1 +12VDC
Pin 2 +12VDC
Pin 3 GND
Pin 4 GND
Ethernet 1:
RJ45 connector Ethernet OP
Ethernet ON
Ethernet IP
Ethernet IN
Ethernet 2:
RJ45 connector Secondary Ethernet OP
Secondary Ethernet ON
Secondary Ethernet IP
Secondary Ethernet IN
DB-15 (male) Pin 1 RS485 TX+
Pin 2 RS485 TX-
Pin 3 GND
Pin 4 RS485 RX+
Pin 5 RS485 RX-
Pin 6 GND
Pin 7 Engineering use only
Pin 8 Engineering use only
Pin 9 GNS
Pin 10 RS232 Control TX
Pin 11 RS232 Control RX
Pin 12 GND
Pin 13 Radio Controller Trainer +
Pin 14 Radio Controller Trainer -
Pin 15 GND
PLUS the following two optional connectors for use when an encoder card is fitted
Female Lemo 5 pin 0B Pin 1 Audio right channel
Pin 2 Audio left channel
Pin 3 Ground for audio
Pin 4 Composite video
Pin 5 Ground for composite video
Female Lemo 3 pin 0B Pin 1 TX
(for RS232 input when Pin 2 RX
encoder is fitted) Pin 3 GND
Options:
NETNode-AVI-UP2P Composite Video and Audio input for
COFDM IP Mesh Node Plain
NETPTZ* Pan, Tilt and Zoom camera for NETNode
NETuPT Micro Pan and Tilt camera option for NETNode
NETIPHW IP in with either 1,2 or 4 Video
and 2,4 or 8 Audio Out Decoder
Mesh Commander*
Mesh Viewer*
Product Code:
NETNode-P-100150 IP Mesh Node 1W 1.00-1.50GHz excl ants, incl PSU12/4
NETNode-P-217250 IP Mesh Node 1W 2.17-2.50GHz excl ants, incl PSU12/4
NETNode-P-450500* IP Mesh Node 1W 4.50-5.00GHz excl ants, incl PSU12/4
NETNode-P-550600* IP Mesh Node 1W 5.50-6.00GHz excl ants, incl PSU12/4
Comentários a estes Manuais